KVCF Differential Flow Transducer

KVCF Differential Flow Transducer Suitable to dirty fluids Low requirement for straight pipe

KVCF Differential Flow Transducer can be used to measure flow of fluid, such as two-phase medium (moisture, condensate, etc), dirty medium (coke-oven gas, GFG, natural gas, raw oil, etc) and so on.

Technical Features:

Low installation requirement: 0~3D for upstream and 0~1D for downstreamTurndown ratio: 10:1Low pressure loss: pressure loss is just 1/3 ~1/5 of that of orifice plate for same βAbrasion resistance: vacuum will be produced after streamlined cone restriction, avoiding cone from wearing outNo block, no adherence: due to the contour of the V-cone not allow for area of stagnation where debris, consensation or particles from the fluid could accumulateExcellent repeatability:  the V-cone primary element exhibits excellent repeatability of + 0.1%Long term stability: β ratio with no change for long term provide high accuracy for long timeSignal stability: signal fluctuation is 1/10 of that of orifice plateHigh accuracy: + 0.5%

Technical Specifications:

Accuracy: ±0.5%Repeatability: ±0.1%Rated Pressure: ≤16MPa, Maximum ≤42MPaOperating Temperature: -40 ~ 700oCAmbient: -40 ~ 65oCInstallation Requirement: 0 ~ 3D for upstream, 0~1D for downstreamTurndown Ratio: 10:1Medium: Gas / Liquid / SteamStructure type: Pipe Flanged / Directly welded / Square PipeMaterial: Kinds of metalFlange Standard: As required

KVCF Differential Flow Transducer